How to Make a CNC Mill.

【Sponsored Links】

How to Make a CNC Mill.

One day I have found this site.

 

Originalmind.

 

They sell parts of CNC.Motor, base, cable and others.

 

I bought these parts immediately.

 

All began on this day!




【Sponsored Links】



How to Make a CNC Mill. List of articles

How to Make a CNC Mill. Step1 - Bought p...

One day I have found this site.Originalmind.They sell parts of CNC.Motor, base, cable and others.I bought these parts immediately.

≫More

How to Make a CNC Mill. Step2 - Make par...

I drew a picture using CAD.I output G code using CAM.AndI cut an aluminum board using a Band saw.Because I do not yet have CNC. :-)

≫More

How to Make a CNC Mill. Step3 - X-axis

The next makes a color for stepping motors.I used the brass.I cut it to length of 37mm.I worked carefully.

≫More

How to Make a CNC Mill. Step4 - Y-axis

Today, I made the Y-axis.The X-axis and the Y-axis are the same structure.It was completed immediately.

≫More

How to Make a CNC Mill. Step5 - Test ope...

【FYH(日本ピローブロック)】 クリーンピロー UFL 08 【 送料無料 一部地域を除く 】価格:1,512円(税込、送料込)I bought the bearing unit such as the image.It is not the best Solution. However, I c...

≫More

How to Make a CNC Mill. Step6 - Z-axis

I made the Z-axis.There were four holes of 3mm in the upper part of the column.I use these.

≫More

How to Make a CNC Mill. Step7 - Adjustme...

The assembling was over.I make the parts of the motorcycle.I wrote a drawing by CAD.I generated G code by CAM.It became fun. But Don't get excited!I b...

≫More

How to Make a CNC Mill. Step8 - Completi...

I make a hole for bearings. it is precise. Diameter of hole is 28mm.I use the aluminum plate of thickness 10mm.I do not have a drill of 28mm.I can ope...

≫More

【Sponsored Links】

Mail form


Subject:



Your e-mail address: